Powered by Blogger.
We are saddened to announce the passing of Gary Bunzer on April 17, 2020. We hope the RV Doctor website will continue to provide helpful information for you. Thank you for your interest and support for the RV Doctor - Debbie, Heather and Gretchen

Friday, October 30, 2009

Thermoplastic Welding

I don’t have much experience with an RV, but I do have a polypropylene gas tank on my Dodge Ram 4x4 and it has a leak in the bottom. Do you have any suggestions on repairing this without removal of tank? I have tried some of the fiberglass repair kits but they did not hold.
Frank, (Savannah, GA)


Frank, the good news is that polypropylene, being a thermoplastic, can be successfully welded. Other thermoplastic tanks common to RVs are made from polyethylene and ABS; all of which can be safely welded. Cement-type repair kits, as you’ve found out, simply will not repair a plastic tank permanently; welding is the only viable method of a permanent repair in my opinion. Another plus, plastic welding can be performed safely on polypropylene gasoline tanks since the practice employs hot air or nitrogen rather than arcing and sparking. Simply draining the tank is all that is necessary. Remember though, the area must be clean and dry to effectively weld. The downside is that it takes specialty equipment in order to weld plastics. Check with your local RV repair facilities. Many shops have plastic welding machines since the same technology is used for polyethylene water tanks and ABS holding tanks as mentioned above. Some RV repair shops will indeed have a welder. Finding them is the difficult task. Let your fingers do the walking first.

By the way, if you'd like to learn how to do this yourself, drop me another email. I have a videotape that teaches pro technicians how to weld plastics.

(Note: For a similar question, that bounces back to the response above, check out this post from another reader)



Disclaimer:

In all instances, every effort is made to ensure the correctness of all content on the RV Doctor Website. It is imperative that if you choose to follow any instructions or procedures outlined on any page of this website, you must first satisfy yourself thoroughly that neither personal nor product safety will be compromised or jeopardized.

All rights reserved.

If you are in doubt or do not feel comfortable about a procedure, do not continue. Simply call your local RV service facility and make an appointment with them. The advice, recommendations and procedures offered by the RV Doctor are solely those of Gary. They do not necessarily reflect the opinions, procedures and recommendations of our sponsors or advertisers.